The
Turbo T-15 can be used as a freestanding centrifuge or in conjunction with
tanks, pumps and chillers. Typical flow rates range from 10-25 gpm and
can handle up to 1.5 gallons per hour of solids.
The
Turbo T-18 can be used as a freestanding centrifuge or in conjunction with
tanks, pumps and chillers. Typical flow rates range from 15-30 gpm and
can handle up to 3 gallons per hour of solids.
The
Turbo T-40 adds additional capacity when higher flows or higher solids capacities
are needed. Typical flow rates range up to 40 gpm and can handle up to 6
gallons per hour of solids.
The
Turbo T-60 can be used as a freestanding centrifuge or in conjunction with
tanks, pumps and chillers. Typical flow rates range up to 60 gpm and can
handle up to 8 gallons per hour of solids.
Also Available in 3-phase Designs
The
T-18-3 separator is a fully automatic self-cleaning centrifuge with process
capacities up to 8 gpm. Cleaned coolant is discharged continually during
the run/feed mode while tramp oil is separated and discharged in a separate
liquid stream. During the automatic cleaning cycle, feed is stopped and the
solids are discharged from the bowl.
The
T-40-3 separator is a fully automatic self-cleaning centrifuge for applications
where higher flows are required. Cleaned coolant is discharged continually
during the run/feed mode while tramp oil is separated and discharged in a separate
liquid stream. During the automatic cleaning cycle, feed is stopped and the
solids are discharged from the bowl.
